Video call: the remote check-up
16 min readUpdated on 21 November 2026
This guide describes how to run a video check-up with a patient, from the appointment in the schedule to the report in the chart. It is intended for the doctor. The patient installs nothing and creates no account: they open a link on their phone.
The video call is a check-up, not a visit. It is for seeing how a patient is doing after a treatment already done at the practice. A first visit and the choice of a new treatment are always done at the practice, and if the connection is not good enough the report lets you reschedule in person.
Prerequisites
- An account with the doctor role. For front desk staff the
Video callbutton does not appear: starting a check-up is a medical act. - An appointment in the schedule with a patient, not cancelled and not on a past day.
- The patient's date of birth in their record. It is used to recognise them when they open the link. If it is missing, the page tells you and lets you add it right there, without going to the patient record.
- A computer or tablet with a microphone and camera, and an up-to-date browser (Safari or Chrome).
- The feature is on by default. If it has been switched off on your system, the page says
Video calls are not active on this system.
Starting a video call from the menu
The shortest way is the Video calls item in the menu. Press New video call and choose Who with:
With a patient: pick them from the list. Everything in this guide applies: date of birth, consent, report.Without a patient: a call with a colleague, or with someone not yet on file. You can type their name inName of the person you call, but it is optional. Whoever joins gives no date of birth and nothing is written in the chart; the call is not transcribed and not recorded.
Press Create and open: the call starts now and the waiting room opens straight away, with the link to send. On the Video calls page you also find Rooms open today, which you rejoin with Rejoin.
From the schedule it still works as before: open the appointment and press Video call.
Step 1: Open the preparation page
Go to Schedule, open the appointment and press Video call. A page opens with the patient's name, the time and a few rows: the link to send, the patient's agreement and, if they are active, the transcription and the audio recording.
If something prevents you from starting, a single notice appears at the top, for the one thing that is missing. The Start the video call button stays off until it is solved.
If the patient has no in-person visit in the chart, a reminder appears above the rows: a first visit and the choice of a treatment are done at the practice. It is a reminder, not a block: you decide who to see remotely. Some practices do switch on a stricter rule (see If something goes wrong).
Step 2: Add the date of birth, if it is missing
If there is no date of birth in the patient record, the page says The patient's date of birth is missing from their record. It is needed to recognise them when they join. and shows the field Patient's date of birth. Enter it and press Save and prepare the link: the date goes into the record and the link appears at once.
Step 3: Send the link to the patient
The row Send the link to the patient has two buttons:
Copycopies the link to the clipboard. The link is also always shown in full below the rows, so you can select it by hand if copying fails.Emailopens your mail program with the message already written and the patient's address.
Nothing is sent from here on its own: you send the message, when you want. The link is valid until the end of the day and covers only that appointment. If it expires or gets lost, reopen the page and prepare a new one.
Step 4: What the patient does
The patient opens the link on their phone. They see the name of the practice and yours, then:
- they enter their date of birth (
Your date of birth) and pressContinue. With five wrong dates in an hour the door closes and the patient has to wait or call the practice; - they read
Please read before joining: what the check-up is, what it is not, who sees the data, where voice and image travel; - they tick
I have read and agree to the video call. If transcription is active there is also a second, optional tick:I agree to the visit being transcribed. If audio recording is active there is a third, also optional tick:I agree to the audio recording of the visit. Without the optional ticks the call goes ahead anyway; - they reach the waiting room and wait for you to come in.
On your page the row Patient's agreement changes from Not yet to Recorded, with date and time, without you reloading anything. The same goes for the transcription row, which becomes Agreed, and for the audio recording row, which becomes Agreed with the date.
Step 5: Start, and use the waiting room
If nothing stands in the way, the waiting room opens by itself, without going through the preparation page (you find it again with Details). Over the video a label tells you what is happening on the other side: they have not opened the link yet, they have opened the link and are waiting for you to join, or they are already in the call. Below is the link to send, with Copy and Email, so you do not have to go back.
From the preparation page you also get there with Start the video call. The waiting room looks like the room: your own image on a dark background and, at the bottom, the round microphone and camera buttons, red when they are off. If the device has more than one microphone or camera, the Microphone and camera button opens the two menus to choose.
The first time, the browser asks for permission to use the microphone and camera. Allow it. If the permission has not arrived after a few seconds, a notice appears with the Try again button: look for the request near the address bar, choose Allow and press Try again.
Step 6: Join the room
Press Join. You open the room: the patient, in the waiting room, sees The doctor has joined. You can join now. and only from that moment does their Join button light up.
When you join, today's visit is opened in the chart. A call that does not start leaves no empty visit behind.
The room fills the whole screen, on the phone too. The other person fills the page; your own image sits in a small box in a corner, and you can drag it to another corner if it covers something. At the top left a label shows the name, how long the call has lasted and a coloured dot for the connection; if the connection is not good the label says so (Unstable connection, Poor connection, Connection lost). Below it, while they run, Transcription on and Audio recording on: the patient sees them too.
At the bottom there is a bar of round buttons. Each button's name appears when you hover over it with the mouse:
- the microphone (
Turn the microphone off/Turn the microphone on) and the camera (Turn the camera off/Turn the camera on): they turn red when they are off; Show transcript and patient/Hide transcript and patient: opens theCall panel, with theTranscripttab (only if transcription is switched on in the system, see Step 7) and thePatienttab. On a computer it sits on the right and is open by default; on the phone it slides up from the bottom;More options, withStop transcription/Resume transcriptionandStop the recording/Resume the recording, only if the patient agreed to them;- the red button,
End the call, which closes it for both of you.
The patient has the same room, without the panel: in More options they find Stop transcription and Stop the recording.
The side panel has two tabs. Transcript (see Step 7) and Patient: the safety notice (allergies, pregnancy, anticoagulants) and the clinical timeline, the same as in the record. Open the record takes you to the full record.
You can leave the room without ending the call. If you open the record or another page of Fibonacci, the call stays open in a small window in a corner, on the phone too: you see and hear the patient, and the transcription goes on. You can drag the small window to another corner; it has three round buttons: the microphone, Back to the call and End the call, which takes you to the The call has ended screen.
The Assistant button opens the Fibonacci assistant over the call, for general questions (a drug, a technique, how to do something in the app). It does not read the patient's record and its warnings apply: do not write names or details that identify the patient.
If the connection drops, Reconnect appears. If you join from a second device, the first one is closed and it tells you so.
Step 7: Transcription, if there is one
Transcription is optional and starts only if it is switched on in the system and the patient has agreed with their tick. While it runs, Transcription on appears in the room. You can stop and resume it; the patient can stop it whenever they like, and from then on the call is no longer written down.
Both voices are sent in short pieces to an outside service that turns them into text. For the transcription the audio is not kept, and the video is never recorded. The text ends up in the patient's record, Dictations tab, under today's visit, titled Video call transcript, one turn per line. You can already read it during the call, in the Call panel, Transcript tab: it arrives in pieces, about every 30 seconds. From the same panel Prepare a draft summary asks for the draft (see Step 8): it is not saved on its own and you find it in the report when you end the call.
Every turn carries the label of who is speaking, Doctor: or Patient:. The labels come from the channel the voice arrives on, not from voice recognition: inside the same 30-second piece the order of the two turns may not be exact. Reread before relying on an important attribution.
Step 7 bis: Audio recording, if there is one
This is a separate function, on by default but with its own patient tick and its own switch: it is not the transcription. If the patient agreed, Audio recording on appears in the room and your browser records both voices as an audio file (never the video). You can stop it with Stop the recording and resume it; the patient can withdraw consent at any time, and from then on the audio is no longer recorded.
The part recorded up to that point is saved, the rest is not, and resuming starts a new file. The file is encrypted and goes into today's visit: you find it in the patient's documents, type Audio recording of the visit. If saving fails the file stays in memory and is retried when the call ends: keep the page open until the report says the recording is in the chart.
To listen, open its row in the documents: a window with the player opens, and every listen is kept in the access log. The recording has an expiry (30 days from saving): once expired, the row says To delete. It is not deleted by itself: you delete it with Delete the recording and a confirmation, and the file is removed from the database. A note stays in the chart saying that the recording existed and was deleted.
The end of the call, and how to rejoin
When you press End the call you do not have to do anything. The call has ended opens, with the choices:
Leave: you go back toVideo calls. The room stays open until tonight.Rejoin the call: you go back to the waiting room and join again. The patient, who sees that the doctor has ended the call, stays on their page and rejoins withRejoinas soon as you are back.Write the report: now, or later. The visit stays open in the chart until you save it.New video call withthe patient: a new call with the same person, in one click.Close the room: from then on the link no longer works and nobody can rejoin. Use it when you are really done.
Step 8: The report
From the end of the call, Write the report opens Check-up report. If it is not the right moment, Not now takes you back to the choices. You fill it in like this:
Was the connection good enough for the check-up?:Yes, good enough,No, not good enoughorThe patient did not connect. The answer is yours;Was anyone else present?: one click opens theWho else was presentfield, if a relative or a companion was there;Report: what you saw and what you decided. If there is a transcript,Use as a starting pointbrings it into the text.
If there is a transcription you also find Prepare a draft summary: an assistant writes a draft from the text of the call, and it can be wrong. The draft is not saved by itself: Add to the report moves it into the text, Redo the draft asks for another.
Save the report puts it in today's visit and completes it. The report keeps a record of who was present, how the connection was, the date of the patient's agreement and the time of the call. If you answered that the connection was not good enough or that the patient did not connect, Reschedule in person appears and takes you to the schedule.
Then Open the chart takes you to the patient record, and New video call with the patient starts another one. If you leave before writing the report, reopen the call from Video calls or from the schedule: you will find Write the report and a notice that the check-up has started.
If something goes wrong
The messages you see, and what to do:
The patient's date of birth is missing from their record…: enter it in the field under the notice and save (Step 2).There is no completed in-person visit. A remote check-up is only for patients already seen at the clinic.: this appears only if the practice has switched on the rule that allows remote check-ups only for patients already seen in person. The link is not prepared: the patient has to be seen at the practice first, or ask the administrator whether the rule is intended.This appointment is cancelled or falls on a past day.: open an appointment for today or a future day.This appointment has no patient.: link a patient to the appointment from the schedule.The video call is started by the doctor.: the page is used with a doctor account, not a front desk one.Video calls are not active on this system.orThe video call service is not set up on this system yet.: the feature is not switched on for your practice. Write to support.I could not prepare the video call. Try again shortly.: reopen the page after a moment.The browser hasn't allowed the microphone and camera yet…: allow it from the request near the address bar and pressTry again.The browser will not let me use the microphone and camera…: the permission was refused. Allow access in the site settings and try again.I cannot find the microphone…: check that it is connected, thenTry again.The microphone or camera is in use by another application…: close the other application and try again.This browser does not support video calls. Open the link with Safari or Chrome.: change browser.I cannot connect you directly from this network…: change network (Wi-Fi or mobile data) and try again.The doctor has not joined yet.(seen by the patient): join the room yourself.Too many attempts to join in a short time. Try again in a little while.: wait a few minutes.You joined the call from another device. It has been closed here.: the call carries on on the other device. To come back here, pressTry again.I could not open the visit in the chart. Try again.: try joining again. The call does not leave an empty visit.I could not save the report. Try again.: the text you wrote stays on the page, pressSave the reportagain.I could not copy it.: select the link shown below the rows and copy it by hand.- The patient says the link does not work (
This link is no longer valid): it has expired, or belongs to another appointment. Open the page and send a new one. - The patient's date of birth "does not match": check the one in the record. If it is wrong, correct it, then send the link again.
Limits to know
- It is a check-up after a treatment already done. It does not replace a visit at the practice, it is not a first visit and it is not for deciding on a new treatment.
- One patient at a time, one device per side. There is no screen sharing, no video recording and no subtitles.
- The summary is a draft written by an assistant: reread it before using it.
- The video is never recorded. The audio of the transcription is not kept. What stays in the chart is the report you write and, only if the patient agreed, the transcript and the audio recording, which expires.
- The patient must have given their agreement before joining. Without it the room does not open.
Common mistakes
- Sending the link too early. It is valid only until the end of the day and for that appointment.
- Waiting for the patient to come in. You open the room: until you press
Jointhe patient stays in the waiting room. - Closing the tab to finish. Closing the tab is the same as leaving. To finish use
End the call: then you choose whether to leave, rejoin or write the report. - Forgetting the report. The check-up is not complete until you save it. You can write it later: the visit stays open in the chart.
- Leaving the room open. Until you press
Close the room, anyone with the link can rejoin until the end of the day.